Untitled Document

Lightweight Tooling Foam - Tool Lite

Category: Adhesives & Pastes
Ratio: 100pbw to 33pbw
Hardener: Tool Lite Part B
Description: Tool Lite is a lightweight, colored coded, two component epoxy system. When mixed together it forms a soft, dough-like consistency that cures at room temperature with low shrinkage, excellent toughness and dimensional stability. Recommended Use: Apply 2 epoxy gel coats (RSC-301X &SC-150-N), hen 2 layers of style 7500 fiberglass cloth with clear lamination resin (WB-400 & C-201) , then 1/4" to 1/2" thick Tool Lite in this application will yield a very lightweight sandwich mold or laminate.
Ratio By Weight: 100pbw to 33pbw
Ratio by Volume: 3 to 1
Pot Life at 72° F (200 Gram Mass): 90-120 minutes
Viscosity: lightweight dough
Cure Time: 12-24 hours
Shore "D" Room Temperature: 55
Heat Distortion: 110°F
Density Resin: 4.4
Density Hardener: 4.4
Density Mixed (lbs Per Gallon): 6.0
Specific Gravity Resin: .53
Specific Gravity Hardener: .53
Specific Gravity Mixed: .53
Coverage: Pail unit is 16lbs., approx. 14 sq. ft. at 1/2"

« Back To Product Listings

Contact Us

5959 18 ½ Mile Road
Sterling Heights, MI 48314